BCBMT - DIBUTYLAMINE 1260
- MSDS: BCBMT
- Manufacturer: EASTMAN KODAK COMPANY
- Product Name: DIBUTYLAMINE 1260
- National Stock Number: 6810-00K000819
Product Identification
Product ID:DIBUTYLAMINE 1260
MSDS Date:01/01/1985
FSC:6810
NIIN:00K000819
MSDS Number: BCBMT
Responsible Party
ROCHESTER, NY 14650
US
Emergency Phone: 716-722-5151
Info Phone: 716-722-5151
Cage: 19139
Contractor
Telephone: 716-722-5151/(800) 242-2424
Cage: 19139
Ingredients
DIBUTYLAMINE (CAS #111-92-2)
CAS: 111-92-2
RTECS: HR7780000
Fraction By Weight: 100%
Hazards
Effects of Overexposure:INH:IRRIT,HEADACHE BY VAP;EYES:SEV
BURN,IRRIT;SKIN:SEVERE BURN AND/OR IRRITATION ON LIQD CONTACT.
First Aid
First Aid:INH:REMOVE FROM EXPOSURE.GIVE CPR/OXY IF NEEDED GET MED
HELP;EYES:FLUSH IMMED W/PLENTY OF WATER FOR AT LEAST 15 MIN & GET
MED ATTN;SKIN:FLUSH IMMEDIATELY W/WATER WHILE REMOVING CONTAMINATED
CLOTHING & SHOES,FOR AT LEAST 15 MIN.CALL A PHYSICIAN.
Fire Fighting
Flash Point:104F(40C)-CC
Lower Limits:UNK
Upper Limits:UNK
Extinguishing Media:CO*2,DRY CHEMICAL
Fire Fighting Procedures:USE AIR MASK
Unusual Fire/Explosion Hazard:NONE KNOWN
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION WEAR SUITABLE
PROTECTV CLOTHG,ABSORB SPILLS ON VERMICULITE.PLACE IN FIBER
CARBON.WASH SPILL AREA WELL W/SOAP & WATER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM OXIDIZING
MATERIALS.STORE IN A COOL,DRY WELL-VENTILATED PLACE.
Other Precautions:AVOID SKIN CONTACT.WASH THOROUGHLY AFTER HANDLING.
Exposure Controls
Respiratory Protection:NONE REQD
Ventilation:LOCAL EXHAUST/MECHANICAL(GEN.)
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GOGGLES/GLASSES
Other Protective Equipment:AS NEEDED TO PREVENT SKIN CONTACT
Supplemental Safety and Health
MSDS FM MFGR DATED:6-7-76.
Chemical Properties
HCC:C2
Boiling Pt:B.P. Text:312-316F
Vapor Pres:2MM
Vapor Density:4.46
Spec Gravity:0/7601
Solubility in Water:COMPLETE
Appearance and Odor:LIQUID;COLORLESS;AMMONIA ODOR.
Percent Volatiles by Volume:100%
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZERS/CORROSIVE
Stability Condition to Avoid:SOURCE OF HEAT
Hazardous Decomposition Products:NH*3/CO,CO*2
Disposal
Waste Disposal Methods:MIX W/FLAMMABLE LIQUID/SOLVENT,SPRAY INTO
INCINERATOR EQUIPPED W/AFTER BURNER & SCRUBBER.OBSERVE ALL
FEDERAL,STATE & LOCAL LAWS CONCERNING HEALTH & ENVIRONMENT.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.